hey
 
8501 N.W. 90th St. Medley, Florida 33166 | Phone: 305-696-8660  


Standard Products
2000 La Porte French Door
3000 Casement Window
4000 Designer Window
6000 Picture Window
7500 Single Hung Window
8500 Horizontal Rolling Window
9000 Sliding Glass Door
Mullions
Impact Products
2200 La Porte HG French Door
3200 HG Casement Window
4200 HG Designer Window
6200 HG Picture Window
7700 HG Single Hung Window
8700 HG Horizontal Rolling Window
9200 HG Sliding Glass Door
Mullions
 
Download Center

download NOA's

download Product Specs
download Installation Guides
download CAD files
download Engineering Docs



Autodesk DWF Viewer (Free Download) Adobe Reader (Free Download)

divider

Contact Details

 

Lawson Industries, Inc.


Email request to Info@lawsonwindows.com

F: 786-924-7000
Info@lawsonwindows.com


8501 N.W. 90th St.
Medley, Florida 33166

 
Lawson Windows' - 7700 Hurricane Guard Single Hung Window
Specifications
Maximum Size 53 1/8 x 74 1/4
Maximum Design Pressure 80 PSF
Glass Thickness 5/16
Glass Components Per Product Approval
Muntin Profile Exterior/Flat Interior
Frame Color White,Bronze
Frame Depth 2 5/8
Miami-Dade County NOA Reference Below

divider

General Information
Single hung window shall be 7700 Series as manufactured by Lawson Industries, Inc., Medley, Florida USA and shall conform to A.N.S.I./A.A.M.A. standard 103.3-93, for DHC 47, A.A.M.A. 1302.5-76 for forced entry resistance, and F.B.C. TAS-201, TAS-202 and TAS-203.

divider

General Information
All window members shall be of commercial quality 6063 aluminum to T5 and T6 temper. All frame members shall have a minimum dimension of 2 5/8, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #10 sheet metal screws. Horizontal meeting rails shall be of tubular construction, and attached to verticals with two sheet metal screws per joint. Vent rails shall also be of tubular design, and contain integrally extruded lift rails. Vent sill rail shall be fitted with weathering bulb vinyl to seal sill to intermediate riser of sill. Weathering sill shall also contain polypropolene pile with transparent vinyl fin. Each vent rail shall contain two 3 long spring loaded claw latches that engage with full-length lip to provide positive, secure latching.

divider

General Information
Exposed aluminum shall be coated with an electro-statically applied organic finish meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have minimum of 1.0 mil dry film thickness in a white or bronze color.

divider

General Information
Sash shall operate on block & tackle, springs and pulley balances, which are concealed from view during vent operation. Sash shall be removed from the interior for glass cleaning, when vent is in take-out position only.

divider

General Information
When specified tubular aluminum exterior muntin and flat interior muntin shall be applied to glass in multitude of standard and custom configurations.

divider

General Information
All half screens shall be of rolled aluminum tubular profile, and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill, and meeting rail. Mesh fabric shall be 18 x 16 dark grey fiberglass. Mesh shall be resplindable with plastic material.

divider

General Information
All frame and sash members shall accommodate annealed laminated glass in nominal thickness of 5/16. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket. A snap fitted aluminum glazing bead containing a compressible vinyl bulb shall be factory applied from the exterior to conceal, and protect the glazing pocket.

divider

General Information
All frame and sash members shall accommodate annealed laminated glass in nominal thickness of 5/16. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket. A snap fitted aluminum glazing bead containing a compressible vinyl bulb shall be factory applied from the exterior to conceal, and protect the glazing pocket.

 



Features & Benefits

Block and tackle balance for easy vent removal.

Bottom sill latch eliminates possible accessibility conflict.

Extruded aluminum snap-on glazing bead provides a strong, clean and neat appearance.

Tubular horizontal rails reduce bowing.

Single plane weathering eliminates gaps that permit air leakage.

Fin-seal provides highly efficient weather-stripping.

Recessed jamb installation holes so screw heads won’t interfere with balance travel.

Vent lift rail provides ease of grasping vent.

Sill riser and vent rail are both weathered providing the most efficient defense against air and water penetration.


Profile extruded aluminum muntins
have a pleasing appearance that match muntins on our other impact products.

Frame depth is 2 5/8” making it a practical depth to match most commonly available wood bucks.


Product Resources

download Installation Guide

download Rough Openings Guide

download Pattern Documentation

download CAD files

download Tech Notes

download Egress Documentation

download Product Brochure

download NFRC Thermal Reports

 

Product NOAs

NOA document   NOA document   NOA document  

 

Product Sample Settings
sample project featuring 7700 Hurricane Guard Single Hung Window