HOME

SALES & SUPPORT

INFO CENTER

CONTACT US

QUALITY DOORS & WINDOWS

2000 SERIES FRENCH DOOR

Aluminum French door that looks just like wood, but won't warp or succumb to the Florida climate.

 

SPECIFICATIONS

Maximum Panel Size

Configurations

Maximum Design Pressure

Glass Thickness

Muntin

Frame Color

Miami-Dade County NOA

35 3/16” x 93” (Nominal)

X, XX, OX, OXO, OXXO

Per Notice of Acceptance

3/16”

Aluminum Profile Exterior and Interior

White,Bronze

Reference Below

MADE WITH PRIDE IN THE USA

LAWSON WINDOWS & DOORS

Established in 1960, still reliable today, tomorrow and beyond!

FEATURES & BENEFITS - DOWNLOADS

GENERAL INFORMATION

Sturdy construction is based upon an aluminum wall thickness that exceeds 1/16” in many areas.

Visually appealing with deep jambs, wide stiles and rails that convey strength and confidence.

Matching side lights feature horizontal lines that match perfectly with the door.

Download - CAD files (.zip)

Multi-point weathering is a combination of polypile weather-strip and flexible bulb vinyl.

Download - Tech Notes (.pdf)

Unique muntin profiles feature a distinctive design that is similar in appearance to traditional wood muntin configuration.

Download - Product Brochure (.pdf)

Security features include two deadbolts in a concealed face, on an inactive panel, that resist door from being opened. For two-point locking see back page.

Standard latch machining with factory bored holes of 2 1/8” diameter with 2 3/8” backset permits the use of most latch and deadbolt hardware by others.

GENERAL INFORMATION

WEATHER STRIPPING

French doors shall be “La Porte” as manufactured by Lawson Industries, Inc., 8501 NW 90 Street, Medley, Florida 33166, USA.

CONSTRUCTION

All stiles and rails shall be weathered using a combination of a flexible virgin PVC bulb and polypropylene pile. Weather-stripping shall be so placed as to provide two points of protection in all vertical locations, and four points of protection in all horizontal locations.

Extrusion shall be 6063 aluminum inT5 and T6 temper.,with walls of from.084”to .125”nominal thickness at all structural locations. Frame jamb shall be tubular shaped. Head, jamb and sill shall have a dimension of 1 3/4”x 41/2”. Frame shall be assembled by securing head and sill to jambs using eight concealed sheet metal screws. Panels shall be assembled using a 5/16”diameter, continuously threaded steel rod, running through top and bottom rail from stile to stile. Each rod end shall be held firmly with washered hex nuts. Sill shall have an overall height of 2 1/8” and contain a 1 1/4”step for panel rail to seat. Exterior face of rail shall finish flush with outside edge of sill. Door shall be exterior swing, providing the best possible protection against water infiltration. Frame head shall contain integral hood projecting out from header to deflect clinging water from running directly down head and into opening at top of panel.

FINISH

Door panels, jambs and header shall receive an electro-statically applied 1.0mil thick dry film coating which meets the performance requirements of A.A.M.A. 603.5 in a choice of bronze or white. All sills shall be mill finish.

AMERICAN DISABILITY ACT (A.D.A)

As added option a combination of a low profile sill and single action latch allows for wheel chair egress/ingress and ease of operation latch.

GLAZING

Panels shall be glazed with 5/16” thick laminated glass consisting of one lite of 1/8” annealed glass on inboard and outboard separated by a .090” thick interlayer as standard. Optimal 7/6”thick laminated glass consisting of one lite of 3/16” thick annealed glass on inboard and outboard side of .090” interlayer is available as added option. Glass color is as specified. Both vertical stiles and horizontal rails are assembled consisting of base extrusion and a snap fitted aluminum quarter-round glazing adapter applied to the exterior side of each panel member to conceal and protect the glazing pocket. Heat-strengthened glass is added option.

GLASS

HARDWARE

Active door stile shall be routed for 21/8”diameter dead bolt and latch with 23/8” backset. Concealed face of inactive leaf shall contain top and bottom flush bolts with stainless steel shaft to engage into header and sill, preventing inactive leaf from opening when bolts are engaged. Two heavy-duty extruded aluminum hinges with stainless steel hinge pin shall support each door leaf.

Panels shall be glazed with 5/16” thick laminated glass consisting of one lite of1/8”annealed glass on inboard and outboard separated by a .090” thick interlayer as standard. Optimal 7/6”thick laminated glass consisting of one lite of 3/16”thick annealed glass on inboard and outboard side of .090” interlayer is available as added option. Glass color is as specified. Both vertical stiles and horizontal rails are assembled consisting of base extrusion and a snap fitted aluminum quarter-round glazing adapter applied to the exterior side of each panel member to conceal and protect the glazing pocket. Heat-strengthened glass is added option.

MUNTINS

Muntins shall be adhesive applied to interior and exterior surface of each panel and side lite. Configuration shall be flat 1 1/4”interior bar and profile radiused exterior extrusion.

Quality, Service, Stability and the Best Value in Aluminum Windows & Doors

ABOUT LAWSON INDUSTRIES

At Lawson Industries, Inc. we are manufacturing leaders of premium quality impact and non-impact windows and doors. Equipped with an advanced manufacturing plant and over 300 employees, including experienced engineers and talented artisans who take pride in their craftsmanship and the quality of their work, we serve general contractors, distributors, architects and dealers among others, who come to us for superior products that are beautifully designed and masterfully constructed.

ADDRESS:

8501 N.W. 90th Street Medley, Florida 33166

EMAIL:

info@lawsonwindows.com

 

 

©2021 All Rights Reserved - Lawson Industries, Inc.

Privacy Policy

Terms of Use