HOME

SALES & SUPPORT

INFO CENTER

CONTACT US

IMPACT DOORS & WINDOWS - HURRICANE GUARD®

7700 SERIES HURRICANE GUARD® SINGLE HUNG WINDOW

Traditional good looks with a state-of-the-art weather protection

 

SPECIFICATIONS

Maximum Size

Maximum Design Pressure

Glass Thickness

Glass Components

Muntin

Frame Color

Frame Depth

Miami-Dade County NOA

53 1/8” x 74 1/4”

80 PSF

5/16”

Per Product Approval

Profile Exterior/Flat Interior

White,Bronze

2 5/8”

Reference Below

MADE WITH PRIDE IN THE USA

LAWSON WINDOWS & DOORS

Established in 1960, still reliable today, tomorrow and beyond!

FEATURES & BENEFITS - DOWNLOADS

GENERAL INFORMATION

Block and tackle balance for easy vent removal.

Bottom sill latch eliminates possible accessibility conflict.

Extruded aluminum snap-on glazing bead provides a strong, clean and neat appearance.

Download - Rough Openings Guide (.pdf)

Tubular horizontal rails reduce bowing.

Download - Pattern Documentation (.pdf)

Single plane weathering eliminates gaps that permit air leakage.

Download - CAD files (.zip)

Fin-seal provides highly efficient weather-stripping.

Recessed jamb installation holes so screw heads won’t interfere with balance travel.

Vent lift rail provides ease of grasping vent.

Sill riser and vent rail are both weathered providing the most efficient defense against air and water penetration.

Profile extruded aluminum muntins have a pleasing appearance that match muntins on our other impact products.

Frame depth is 2 5/8” making it a practical depth to match most commonly available wood bucks.

PRODUCT SAMPLE SETTINGS

GENERAL INFORMATION

MUNTINS

Single hung window shall be 7700 Series as manufactured by Lawson Industries, Inc., Medley, Florida USA and shall conform to A.N.S.I./A.A.M.A. standard 103.3-93, for DHC 47, A.A.M.A. 1302.5-76 for forced entry resistance, and F.B.C. TAS-201, TAS-202 and TAS-203.

When specified tubular aluminum exterior muntin and flat interior muntin shall be applied to glass in multitude of standard and custom configurations.

SCREENS

CONSTRUCTION

All window members shall be of commercial quality 6063 aluminum to T5 and T6 temper. All frame members shall have a minimum dimension of 2 5/8”, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #10 sheet metal screws. Horizontal meeting rails shall be of tubular construction, and attached to verticals with two sheet metal screws per joint. Vent rails shall also be of tubular design, and contain integrally extruded lift rails. Vent sill rail shall be fitted with weathering bulb vinyl to seal sill to intermediate riser of sill. Weathering sill shall also contain polypropylene pile with transparent vinyl fin. Each vent rail shall contain two 3” long spring loaded claw latches that engage with full-length lip to provide positive, secure latching.

FINISH

All half screens shall be of rolled aluminum tubular profile, and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill, and meeting rail. Mesh fabric shall be 18” x 16” dark gray fiberglass. Mesh shall be resplindable with plastic material.

GLAZING

All frame and sash members shall accommodate annealed laminated glass in nominal thickness of 5/16”. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket. A snap fitted aluminum glazing bead containing a compressible vinyl bulb shall be factory applied from the exterior to conceal, and protect the glazing pocket.

Exposed aluminum shall be coated with an electro-statically applied organic finish meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have minimum of 1.0 mil dry film thickness in a white or bronze color.

HARDWARE

Sash shall operate on block & tackle, springs and pulley balances, which are concealed from view during vent operation. Sash shall be removed from the interior for glass cleaning, when vent is in take-out position only.

GLASS

All frame and sash members shall accommodate annealed laminated glass in nominal thickness of 5/16”. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket. A snap fitted aluminum glazing bead containing a compressible vinyl bulb shall be factory applied from the exterior to conceal, and protect the glazing pocket.

Quality, Service, Stability and the Best Value in Aluminum Windows & Doors

ABOUT LAWSON INDUSTRIES

At Lawson Industries, Inc. we are manufacturing leaders of premium quality impact and non-impact windows and doors. Equipped with an advanced manufacturing plant and over 300 employees, including experienced engineers and talented artisans who take pride in their craftsmanship and the quality of their work, we serve general contractors, distributors, architects and dealers among others, who come to us for superior products that are beautifully designed and masterfully constructed.

ADDRESS:

8501 N.W. 90th Street Medley, Florida 33166

EMAIL:

info@lawsonwindows.com

 

 

©2021 All Rights Reserved - Lawson Industries, Inc.

Privacy Policy

Terms of Use