HOME

SALES & SUPPORT

INFO CENTER

CONTACT US

QUALITY DOORS & WINDOWS

A residential rolling window with high performance credentials.

 

SPECIFICATIONS

8500 SERIES HORIZONTAL ROLLING WINDOW

Maximum Size

Configurations

Maximum Design Pressure

Glass Thickness

Glass Components

Muntin

Frame Color

Frame Depth

125” x 63” (XOX) and 74” x 63” (XO, OX)

XOX, XO, OX

Per Notice of Acceptance

1/8”, 3/16”, 1/4” and 1/2” Insulated

Per Notice of Acceptance

Profile Exterior/Flat Interior

White,Bronze

1 7/8”

Miami-Dade County NOA

Reference Below

MADE WITH PRIDE IN THE USA

LAWSON WINDOWS & DOORS

Established in 1960, still reliable today, tomorrow and beyond!

FEATURES & BENEFITS - DOWNLOADS

GENERAL INFORMATION

Brass rollers with stainless axle for ease of operation.

Tubular extruded rails reduce bowing of panels.

Unique sill design is anchored with straps.

Download - Rough Openings Guide (.pdf)

Single plane weathering eliminates gaps that could permit air leakage.

Download - Pattern Documentation (.pdf)

Jamb and vent lock stiles are both weathered to provide the most efficient method of defense against air and water penetration.

Download - CAD files (.zip)

Aluminum glazing bead provides a strong, clean and neat appearance.

Gated weep hole protective cover allows water to escape while preventing insects from entering.

Profile aluminum extruded muntin matches the muntins of our other impact products for visual appeal.

Frame depth is 1 7/8”, making it a practical depth to match most commonly available buck sizes.

Colonial design featuring profile aluminum muntins on exterior, and flat applied muntin on interior

PRODUCT SAMPLE SETTINGS

GENERAL INFORMATION

WEATHER STRIPPING

Rolling window shall be 8500 Series as manufactured by Lawson Industries, Inc., Medley, Florida, USA and shall conform to AAMA/NWWDA 101/I.S.2.-97,

for HS-R 50, A.A.M.A. 1302.5-76 for forced entry resistance.

Double weather stripping throughout unit shall be water-resistant polypropylene pile and virgin PVC vinyl.

SCREENS

CONSTRUCTION

All window members shall be of commercial quality 6063 aluminum hardened to T5 and T6 temper. All frame members shall have a minimum dimension of 1 7/8”, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #8 sheet metal screws. Vertical meeting rails shall be of tubular construction and attached to horizontals with one sheet metal screw per joint. Vent rails shall also be of tubular design and contain integrally extruded pull rails. Vent lock rail shall be fitted with weathering bulb vinyl to seal vent to jamb of frame. Weathering at jamb shall also contain polypropylene pile with transparent vinyl fin. Each vent rail shall contain two 3” -long spring-loaded claw latches that engage with full- length jamb lip to provide positive, secure latching.

FINISH

All half screens shall be of rolled aluminum tubular profile and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill and meeting rail. Mesh fabric shall be 18” x 16” dark grey fiberglass. Mesh shall be resplindable with plastic material.

GLAZING

All frame and sash members shall accommodate glass in nominal thickness of 1/8”, 3/16”, 1/4” or 1/2” insulated. Glass color shall be as specified.

GLASS

All frame and sash members shall accommodate glass in nominal thickness of 1/8”, 3/16”, 1/4” or 1/2” insulated. Glass color shall be as specified.

Exposed aluminum shall be coated with an electrostatically applied organic finish, meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have a minimum of 1.0 mil dry film thickness in a white or bronze color.

HARDWARE

Sash shall roll on two .437 diameter brass rollers with stainless steel axles. Dual gated weep hole baffles shall reduce “blow back” of water resulting from gusting winds. Vents can be removed from interior for glass cleaning when vent is in the unlocked position only.

MUNTINS

When specified, tubular aluminum extruded exterior muntin and flat aluminum interior muntin shall be applied to glass in multitude of standard and custom configurations.

Quality, Service, Stability and the Best Value in Aluminum Windows & Doors

ABOUT LAWSON INDUSTRIES

At Lawson Industries, Inc. we are manufacturing leaders of premium quality impact and non-impact windows and doors. Equipped with an advanced manufacturing plant and over 300 employees, including experienced engineers and talented artisans who take pride in their craftsmanship and the quality of their work, we serve general contractors, distributors, architects and dealers among others, who come to us for superior products that are beautifully designed and masterfully constructed.

ADDRESS:

8501 N.W. 90th Street Medley, Florida 33166

EMAIL:

info@lawsonwindows.com

 

 

©2021 All Rights Reserved - Lawson Industries, Inc.

Privacy Policy

Terms of Use